Home > Products > IPX Proof Test Chamber > Rain Spray Test Chamber >

IPX78 Water Immersion Test Chamber

IPX78 Water Immersion Test Chamber

IPX78 Water Immersion Test Chamber
IPX78 Water Immersion Test ChamberIPX78 Water Immersion Test ChamberIPX78 Water Immersion Test ChamberIPX78 Water Immersion Test ChamberIPX78 Water Immersion Test Chamber
CategoriesRain Spray Test Chamber
AlbumView larger image
BrandCLIMATE Tester
ModelCW Series Water Immersion Test Chamber
Internal dimensionDiameter 606 * height 1000mm
Water pressure0 ~ 0.5MPa adopt air compressor
Sample lift devicePortable stainless steel basket
Water level displayWater pipe with scale
Power sourceThree phase, AC380V, 50/60HZ
External dimensionDiameter 820 * height 2000mm
Test duration0 ~ 99min, 99sec
ControllerDigital pressure gauge & timer
Unit PriceUS $ 5500 / piece
FOB portshenzhen
Terms of PaymentL/C, D/A, D/P, T/T, Paypal
Update Time2019-05-27
Detail Information

IPX78 Water Immersion Test Chamber 

Product introduction:


Water immersion test chamber according to GB4208, IEC60529 relevant standards. It is used to detect the protective performance of the equipment with anti-water, and it is applicable to the product inspection and quality control of the relevant enterprise and quality inspection department.

 

     Technical Parameter:water immersion test chamber


Model

CW-IP78

Internal dimension

Diameter 606 * height 1000mm

Diameter 820 * height 1500mm

External dimension

Diameter 820 * height 2000mm

Diameter 1000 * height 2000mm

Chamber material

304, thickness 3mm

Water pressure

0 ~ 0.5MPa adopt air compressor

Test duration

0 ~ 99min, 99sec

Sample lift device

Portable stainless steel basket

Water level display

Water pipe with scale

Controller

Digital pressure gauge & timer

Power source

Three phase, AC380V, 50/60HZ

 

Design Standard:

IPX-1 Protected against falling water Equivalent to 3-5mm rainfall per minute for a duration of 10 minutes. Unit is placed in its normal operating position.

IPX-2 Protected against falling water when tilted up to 15 degrees - Same as IPX-1 but unit is tested in 4 fixed positions - tilted 15 degrees in each direction from normal operating position.

IPX-3 Protected against spraying water - Water spraying up to 60 degrees from vertical at 10 liters/min at a pressure of 80-100kN/m2 for 5 min.

IPX-4 Protected against splashing water - Same as IPX-3 but water is sprayed at all angles.

IPX-5 Protected against water jets - Water projected at all angles through a 6.3mm nozzle at a flow rate of 12.5 liters/min at a pressure of 30kN/m2 for 3 minutes from a distance of 3 meters.

IPX-6 Protected against heavy seas - Water projected at all angles through a 12.5mm nozzle at a flow rate of 100 liters/min at a pressure of 100kN/m2 for 3 minutes from a distance of 3 meters.

IPX-7 Protected against water immersion - Immersion for 30 minutes at a depth of 1 meter.

IPX-8 Protected against water submersion - The equipment is suitable for continual submersion in water under conditions which are identified by the manufacturer.


Waterproof Test Chamber News


Water immersion test chamber view:


Water Immersion Test Chamber


How to Contact Us?

Please Send your inquiry Details in the below for our quotation, Click "Send" Now!


 

Please send your message to us
*Email
Tel
*Title
*Content

Agree to use terms of service

Tel: +13631613247

ivy@szkuncan.net

Huilong Village, Qiu'ai Town, Yinzhou District, Ningbo City, China