Language:

FOLLOW Climate Tester

Home > Products > IPX Proof Test Chamber > Dust Test Chamber >

IP5 6X Dust Test Chamber

Categories	Dust Test Chamber
Album	View larger image
Brand	CLIMATE Tester
Model	CD Series Dust Test Chamber
Internal chamber material	Stainless steel 304
External chamber material	Stainless steel
Testing time	Testing time 0.1s~ 999hr, adjustable
Controller	PLC controller, touch screen
Dust concentration	Dust concentration 2kg/m3~ 4kg/m3, should be replaced in every 20 tests
Dust type	Dust type Powdered cement, talcum powder
Vacuum system	Pressure gauge
Vacuum pump	0-30Kpa
Air pressure	0.5~0.8MPa
Air flow rate	≤2m/s
FOB port	shenzhen
Terms of Payment	L/C, D/A, D/P, T/T, Paypal
Update Time	2019-02-17

Contact Now

Detail Information

IP5 6X Dust Test Chamber

Product introduction:

Dust test chamber can test the ability of a sample (device) to protect against penetration of dust particles under dry or dust-filled atmosphere.Climate Tester can provide dust test chamber that meet level standards in the IP5X and IP6X.

Usage:

Dust test chamber is suitable for sealing performance testand reliability test of the product, check the sealing performance of theelectronic and electrical products, automobile, motorcycle parts, seals, etc.

Technical Parameter:

Model No.	CD-216-5	CD-512-5		CD-1000-5
Internal dimension (WDH)	600600600mm		800800800mm	100010001000mm
External dimension (WDH)	11009001650mm		130011001800	150013002000mm
Internal chamber material	Stainless steel 304
External chamber material	Stainless steel
Controller	PLC controller, touch screen a. Blowing dust time (Stop/Blow) h/m/s b. Cycle time: can be adjusted c. Pre-set test time: 0s ~ 999h99m99s d. Specimen opening: off – on - off
Testing time	0.1s~ 999hr, adjustable
Dust concentration	2kg/m3~ 4kg/m3, should be replaced in every 20 tests
Dust type	Powdered cement, talcum powder
Vacuum system	Pressure gauge, air filter, pressure regulating FRL, connecting pipe, vacuum pump
Vacuum pump	0-30Kpa
Air pressure	0.5~0.8MPa
Air flow rate	≤2m/s
Power socket inside chamber	Dust proof power socket for specimen opening
Door material	Tempering glass
Power source	Single-phase, AC220V, 50/60HZ

dust test chamber detail Image:

· Glass Sash	Installed on the door (toughened glass, with a manual blowing dust), enclosure specimens were observed in the blowing dust stops.
Dust device	located in the test, at the bottom is used to replace the test required to dust, dust test 20 times need to be replaced.
circulating fan	Low noise type motor, multi-page type centrifugal rotor.
Dustproof plug and vacuum suction nozzle
Internal chamber and specimen shelf	Shape of a funnel shaped, with adjustable vibration cycle, can float in the sky of dust fall in the open holes in.